Step
å
Place your unit into its fi nal position against a wall.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert
the METAL PINS into the hole locations of your choice in the ENDS (A
and B). Set the ADJUSTABLE SHELF (I) onto the METAL PINS.
å
Set the ROD (21A) onto the ROD HANGERS on the ENDS (A and B).
å
To insert the drawer into your unit, tip the front of the drawer down
and drop the rollers on the drawer behind the rollers on the unit. Lift
the front of the drawer up and slide it into the unit.
å
To make adjustments to the drawer, loosen the SCREWS in the
DRAWER FRONT BRACKETS, make needed adjustments, and tighten
the SCREWS.
Step 15
Page 20
1R
2R
A
B
I
21A
(4 used)
