Sauber SF-100, Руководство пользователя

Страница: 16 / 20

16
3. Release the 4 clips from the underside, allowing you to remove the
bottom plate.
2. Turn the Powerhead upside down and remove the small screw from
the centre of the Powerhead.
DO NOT OPEN
4. To remove the rotating brush, lift the right side of the brush first from the
Powerhead, followed by the left side, where the belt loops around the
end cap. Slide the old belt off the drive shaft and then off the end cap. If
the belt is broken, remove all the broken pieces.
5. Place the new belt over the drive shaft first and then around the end
cap. Make sure the text on the belt is outward facing, then insert the
rotating brush back in to the Powerhead. Replace the bottom plate and
insert the screw.