Service and Installation Manual
6
1.1 Function of LEDS
2. MAIN FUNCTIONS
2.1 HOW TO VIEW THE SET POINT
1. Push and immediately release the
SET
key. The display will show the set point value.
2. Push and immediately release the
SET
key or wait for 5 seconds to display the
sensor value again.
2.2 HOW TO CHANGE THE SET POINT
1. Push the
SET
key for more than 2 seconds to change the set point value.
2. The value of the set point will be displayed and the
LED starts blinking.
3. To change the set value, push the
or
key within 10s.
4. To set a new point value, push the SET key again or wait 10s.
2.3 HOW TO START A MANUAL DEFROST
Push the
key for more than 2 seconds and a manual defrost will start
2.4 HOW TO LOCK THE KEYBOARD
1. Keep pressed the
and
keys for more than 3s.
2. The
“POF” message will be displayed and the keyboard will be locked. At this point, it will be possible only
to see the set point or the MAX or Min temperature stored.
3. If a key is pressed more than 3s, the
”POF” message will be displayed.
2.5 HOW TO UNLOCK THE KEYBOARD
Keep pressed the
and
keys together for more than 3s until the
“Pon” message is displayed.
3. ALARM SIGNALS
HOW TO VIEW THE ALARM AND
RESET THE RECORDED ALARM
1. Push the
or
key to
display the alarm signals.
2. When the signal is displayed, hold
the
SET
key until the
“rst” message
is displayed, and push the
SET
key
again. The
“rst” message will start
blinking and the normal temperature
will be displayed again.
