Saturn ION 2005, Познакомьтесь с руководством

Страница: 10 / 16

Getting to Know Your ION
10
Automatic Door Locks
All doors will automatically lock when
the shift lever is moved out of
P (Park) in an automatic transmission,
or when the vehicle speed is greater
than 5 mph (8 km/h) in a manual
transmission.
To disable the automatic door locking
feature:
• Turn the ignition key to RUN with the
engine off and all doors closed.
• Press and hold the power door lock
button until you hear two chimes.
If the automatic
door locking
feature is dis-
abled, it can be
enabled follow-
ing the same
procedure. You
can follow a
similar proce-
dure to enable
or disable
power unlock-
ing as well.
See Section 2 of your Owner Manual.
Delayed Door Locking
If you press the LOCK button on your
Remote Keyless Entry transmitter while
any door or the trunk is open, the doors
will not lock. Instead, the interior chime
will sound three times. Once all doors
and the trunk are closed, the doors will
lock. To cancel this delay, press the
power door lock switch or lock button on
the Remote Keyless Entry transmitter a
second time.
See Section 2 of your Owner Manual.
Saturn Security System
Your Saturn retailer can program the
operation of the Saturn Security System
and Remote Keyless Entry transmitter to
meet your needs. If you want the securi-
ty system to arm itself or the horn not to
chirp when you lock the vehicle, your
retailer can change these and many
other features.
See Section 2 of your Owner Manual.
Retained Accessory Power
Retained Accessory Power allows cer-
tain features on your vehicle to continue
working for up to 10 minutes after the
key is turned to OFF/LOCK, or removed
from the ignition, and until the driver’s
door is opened. Some of these features
include the radio, wipers (HIGH speed
only), power windows and sunroof.
These features will also continue to work
when the ignition key is in the RUN or
ACC position.
See Section 2 of your Owner Manual.
Preventing Window Fogging
To keep the vehicle glass fog-free, the
climate control system knob should be
positioned to the Defrost/Heater ( ) or
Defrost ( ) setting. The Recirculate
button ( ) should be left off.
See Section 3 of your Owner Manual.