Saturn 2009 OUTLOOK, Руководство пользователя

Страница: 339 / 432

After the tires have been rotated,
adjust the front and rear inflation
pressures as shown on the Tire
and Loading Information label.
See Inflation - Tire Pressure on
page 5-45 and Loading the
Vehicle on page 4-18.
Reset the Tire Pressure Monitor
System. See Tire Pressure
Monitor Operation on page 5-48.
Make certain that all wheel
nuts are properly tightened.
See “Wheel Nut Torque” under
Capacities and Specifications
on page 5-98.
{
CAUTION
Rust or dirt on a wheel, or on
the parts to which it is fastened,
can make wheel nuts become
loose after time. The wheel
could come off and cause an
accident. When you change a
wheel, remove any rust or
dirt from places where the
wheel attaches to the vehicle.
(Continued)
CAUTION (Continued)
In an emergency, you can use
a cloth or a paper towel to do
this; but be sure to use a
scraper or wire brush later, if
needed, to get all the rust or
dirt off. See Changing a Flat
Tire on page 5-70.
Make sure the spare tire, if the
vehicle has one, is stored
securely. Push, pull, and then
try to rotate or turn the tire.
If it moves, tighten the cable.
See Storing a Flat or Spare
Tire and Tools on page 5-80.
Service and Appearance Care 5-53