4
Speaker Installation Procedure
1. The Speaker includes a mounting bracket, permitting it to be mounted in a variety of ways. Loosen
the thumbscrews on the side of the speaker and using the mounting bracket as a template, drill the
necessary mounting holes and secure the bracket with the self‐tapping screws provide
2. Position the Speaker on the mounting bracket and secure it by tightening the thumbscrews. The
mounting bracket is used to permanently mount the Speaker in place while permitting it to be tilted
to a desired angle.
Diagram 1
Junction Box Installation
1. Mount the Junction Box beneath the dashboard on the passenger's side of the vehicle or on the
center side post between the front seats. It must be protected from dirt and moisture and must be
afforded adequate space for cooling. There must be sufficient space to allow for connection of all
cabling.
Mounting Screws
Mounting Screws
Diagram 2
2. Connect the Cradle Control Cable, the Speaker, Microphone, Power cable to their respective
corresponding sockets in the Junction Box, as shown in Diagram 3 below.
