Installing the phone into the SatStation Desktop Dock
1. Place the phone into the cradle with the connector at the bottom of the phone aligned
with the connector in the cradle.
Press to release
Microphone
Diagram 5
2. Press the phone back into the cradle as shown in Diagram 5, make sure phone snaps
securely into place.
3. If the phone is OFF, the LED LIGHT RED.
4. If the phone is ON, the LED will light GREN.
Removing the Phone form the Cradle
1. To remove the phone from the cradle press the release button at the top of the cradle,
above the phone.
2. Pull the phone forward and then up and out.
NOTE:
Batteries of the phone will charge within the temperature window of -10 C to +40 C (50 F to 104 F). If the battery is
outside this temperature window, no charge current will be supplied to the battery.
Installation of External Antenna
