Satson HDMI-SPL-2008H, Руководство пользователя

Страница: 7 / 8

~ 6 ~
1. While connecting a new monitor to the splitter, experiencing a short period of time no display may be
expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID for the
HDMI input is necessary to update!
2. For long range high definition HDMI transmission applications, please adopt CAT-5 cable based HDMI
extenders.
3. For firmware update through USB, users MUST first turn off the power, plug USB cable connected to
your PC, and then power up the module! In this setup, the power LED indicator will NOT blink, and this
is normal! Execute the attached or download EPFlash.exe, and the following window will pop up. Click
on “OpenFile” button to direct to the new firmware HEX file, and keep PORT at USB 0! Meantime, keep
“Program With Verification” selected, and then click on “START” button on the bottom of the window!
Wait for seconds until the update process is completed! After firmware update is successfully
accomplished, please unplug USB cable and power off the splitter!
Notice