SATO WS408TT-STD, Руководство пользователя

Страница: 58 / 59

7 Safety precautions
51
 The customer should not replace the print head. Doing so
could result in injury, burns or electric shock.
CAUTION
Do not place in areas with high humidity
 Do not place the printer in areas with high humidity or where
condensation forms. If condensation forms, immediately
turn off the power switch and do not use the printer until it
dries. Using the printer while condensation is on it could
result in electric shock.
Carrying the Printer

When moving the printer, always unplug the power cord
from the outlet and check to make sure all external wires are
disconnected before moving it. Moving the printer with the
wires still connected could damage the cords or connecting
wires and result in a fire or electrical shock.

Do not carry the printer with media loaded in it. The media
could fall out and cause an injury.

When setting the printer on the floor or a stand, make sure
not to get your fingers or hands pinched under the printer
feet.
Power supply
 Do not operate the power switch or plug in/ unplug the
power cord with wet hands. Doing so could result in electric
shock.
Power cord

Keep the power cord away from hot devices. Getting the
power cord close to hot devices could cause the cord’s
covering to melt and cause a fire or electric shock.

When unplugging the power cord from the outlet, be sure to
hold it by the plug. Pulling it by the cord could expose or
break the core wires and cause a fire or electric shock.

The power cord set that comes with the printer is especially
made for this printer. Do not use it with any other electrical
devices.