SATO VP208, Руководство оператора

Страница: 23 / 48

21
Operations
4-2-3-1 OPERATION MODE
CONTINUOUS
OPERATION MODE
OP SETTINGS
TEAR OFF
Sets the operation mode.
Default: TEAR OFF:
After printing, the label is
fed to the cutter position.
Button name and
button pressing
Screen and printer operation
Print/Select
Selects “CONTINUOUS” or “TEAR
OFF.”
Media feed/Enter
Changes to the SENSOR TYPE
screen.
Print/
Media feed/Enter
Changes to OP SETTINGS screen
(page 20).
Print/
Media feed/Enter
+ Press for 3 sec. or
more.
Changes to OP SETTINGS screen
(page 20).
■ Continuous Print and Tear-Off
This printer has two operation modes, continuous print and
tear-off.
Continuous Print Operation Mode
The specified number of sheets will be continuously printed.
After printing the specified number of sheets or printing a
single sheet, the next print start position is placed at the print
head.
Media feed
direction
Simple cutter Media sensor Print head
Before
printing
Printing
End of
printing
①
②
① ②
① ②
Tear-Off Operation Mode
After printing the specified number of sheets continuously, the roll
is fed to the cutter position automatically.
In this mode, the roll is easily cut manually after printing.
For the next printing, the roll is fed back to the print head and
printing will start.
①
②
① ②
①
②
① ②
②
①
②
Media feed
direction
Simple cutter Media sensor Print head
Before printing
Backfeed
Printing
End of
printing
Tear-off
operation
Cut
•
The figure above does not represent actual labels.
4-2-3-2 SENSOR TYPE
NONE
SENSOR TYPE
OP SETTINGS
I-MARK
Sets the sensor type.
Default: I-MARK
I-MARK: Detects the I-mark
(black mark on the rear
of the label).
NONE: Not using the media
pitch sensor
Button name and
button pressing
Screen and printer operation
Print/Select Selects “I-MARK” or “NONE.”
Media feed/Enter
Changes to the ENERGY SAVING
screen (page 22).
Print/
Media feed/Enter
Changes to the OPERATION
MODE screen.
Print/
Media feed/Enter
+ Press for 3 sec. or
more.
Changes to OP SETTINGS screen
(page 20).