PARTS LIST
PROGRAMMING
WIRELESS PUSH BUTTON
PROGRAMMING ADDITIONAL
WIRELESS PUSH BUTTONS
1. Press #1 on the wireless receiver and hold for three
seconds. The green LED light on the back of the wireless
receiver will start blinking (Figure 15)
2. Release #1 on the wireless receiver. Then press the (+)
button on the wireless push button. The green LED light
will stop blinking (Figure 16)
3. Press #2 on the wireless receiver and hold for three
seconds. The red LED light on the back of the wireless
receiver will start blinking (Figure 15)
4. Release #2 on the wireless receiver. The press the (-)
button on the wireless push button. The red LED light will
stop blinking (Figure 16)
www.satoamerica.com
DELETING
WIRELESS PUSH BUTTONS
1. Press #1 on the wireless receiver and hold for three
seconds. Release and press #1 again for three seconds.
The code has been deleted. (Figure 15)
2. Press #2 on the wireless receiver for three seconds.
Release and press #2 again for three seconds. The code
has been deleted (Figure 15)
