5
How to measure temperature
Temperature will be measured when the function switch is placed in TEMP position. Just after the
measurement of air speed, the temperature of air speed sensor will be 100°C or higher since the speed
sensor was heated. Start measuring after full stabilization (it takes about 2minutes.) as in the
measurement of air speed.
Other functions
1) Hold function
: Press the HOLD button to hold the reading.
2) Telescoping rod
: This telescoping type rod is possible to be set its length at will.
Operation after measurement
1) Place the POWER switch in OFF position.
2) Put a sensor cap on after confirming that sensor is in good order.
3) When telescoping rod of probe has been extended for use, retract it to be stored in a case.
NB.
Be sure the POWER switch is in OFF position. Otherwise batteries will
consume. When the instrument is not used for a long time, be sure to take
the batteries out of battery compartment for storage.
