SATO RWG500, Быстрое руководство

Страница: 9 / 16

17
!
5
Insert the EXT cable to
the connector for printer
connection on RWG 500.
Connection is completed.
When connecting, the power of both the printer and the
rewinder must be turned OFF.
Make sure that the printer and the rewinder is set correctly
with the joint plate. If they are not set correctly, Rewinding
error may occur.
CAUTION
18
Label Setting
This rewinder can perform 4 types of label rewinding methods by
combining rewinding shaft types and winding directions.
Printed label surface comes
outside when rewinding. Printed label surface comes
inside when rewinding. Backing
sheet can be seen on outside.
There are 2 types of label winding direction, namely face out
rewinding and face in rewinding. For the above 2 types, the setting
direction against the rewinding shaft are different.
Rewinding Direction
Setting Direction
Face out Rewinding (CCW)
label route
Face in Rewinding (CW)
label route
Select the rewinding method according to the environment where
this rewinder is used, then set the paper.
Rewinding direction : Face in / Face out
Rewinding shaft : Direct Rewinding /
3-inch paper-core Rewinding