SATO M-5900, Руководство по обслуживанию, Страница: 23 / 24

Firmware Factory Reset Procedure
SATO M5900
STEP PROCEDURE
1. Set the printer power switch to the OFF position.
2. Load labels on the printer.
WARNING: This test activates all the heating elements on the print head and
therefore must be performed with a label that is at least 4.4” wide or damage to
your print head may occur.
3. Record current dip switch positions, then place DSW1-7 and DSW1-8 in the
ON or left position.
4. Turn ON the power while pressing LINE & FEED keys. Release when an
audible sound is heard.
5. Place DSW1-8 in the OFF or right position.
6. Press the LINE key once to initialize the test print. The printer will feed a
blank label and after a slight pause, a test label will start printing, indicating
successful completion of the factory reset procedure.
7. Press the FEED key once to stop printing.
8. Place the power switch to the OFF position and return all switches to the
original positions.
9. Turn ON the power and resume operation.
This setting clears all counters and resets printer to factory defaults.
Industrial Bar Code Printers