Page 3
CL4XXe Rotary Cutter Installation
Sato Industrial Bar Code Printers
Label Cutter Kit Installation - Rotary Type
MOUNTING BRACKET
The Cutter is a field installable option. No critical adjustments or special tools
are required.
LABEL CUTTER
ASSEMBLY
(2) SELF TAPPING
SCREWS
CABLE HOLD
DOWN
REPLACEMENT
DOOR
LUBRICANT
ROTARY LABEL CUTTER KIT
CABLE
STEP
PROCEDURE
1.
Remove the front door from the CL4XXe Printer.
Fig. 2
2.
Remove and set aside (2) screws from stay.
Remove latch and set aside the screw.
Fig. 3
3.
Place mounting plate in position and secure with (2) screws removed in Step 2.
Figs. 3 & 4
4.
Secure base of mounting plate with screw from cutter kit.
Fig. 5
5.
Refer to
Figs. 6.
Place main cutter unit on a flat surface so that the PC Board
is accessible.
Install the supplied cable to cutter board as shown. Keys on cable connector do
not prevent incorrect orientation. However, the keys are provided as an
orientation aid.
6.
Route the cables from the cutter through the access hole in the printer.
Fig. 7
7.
Loosen (2) screws/retainers at the base of the cutter. Position and slide the
cutter into the mounting plate and secure with the screws/retainers.
Fig. 8
8.
Secure cutter bracket to frame with screw previously removed in Step 2.
Fig. 9