SATO KEIRYOKI 8111-00, Инструкция по эксплуатации

Страница: 3 / 12

1
INTRODUCTION
Thank you for purchasing the SK-110TRHII series digital thermohygrometers.
- These products are designed to measure temperature and humidity of atmosphere. Do not use
these for other purposes.
- Read this manual thoroughly before use. Keep the manual in safe place for future references.
WARNING
-
Model SK-110TRHII series are not of explosion proof types. Never use them to measure gases
including flammable gases.
DANGER – EXPLOSIVE There is a fear of explosion –
CAUTIONS
Observe the following points for the proper use of instrument .

This instrument is delicately made. Be careful not to drop it or give shocks to it.

The probe and main body are unified. The probe cannot be unfastened from the main body.

Never disassemble or alter the unit to avoid the causes of trouble.

These instruments are not waterproof. Never let them get wet.

Never use the unit in an environment other than normal atmosphere.

Don’t use the unit at a place exposed to direct sunlight or near heaters. Doing so may result in
failure or case will be deformed.

Do not use the unit in the circumstances where electric noises are generated. Doing so may
result in unstable display or large errors.

Don’t pull strongly, bend or bind the sensor cord. Don’t put heavy things on the sensor cord or
modify the sensor cord and the cord will be damaged.

If the unit is not used for a long period of time, be sure to remove the batteries. Otherwise,
liquid may leak and it results in failure.

Do not dispose the used batteries in a fire.

Keep the batteries out of reach of children. If swallowed the battery accidentally, consult a
doctor immediately.

Don’t wash or wipe the unit with alcohol, thinner or other detergent etc. When the unit is
stained wipe it with the following cloth. Dip a cloth into lukewarm water in which detergent is
dissolved and squeeze it tight.

When the condensing occurs during use of the unit, turn the power off and let the humidity
sensor naturally at normal temperature.

Type 2 has a pointed probe. Be careful in use as the sharp tip could cause accidental injuries.

Do not bend the sensing stem or flexible tube in the type 2, they 3 and type 4.