Place antenna with unobstructed line of sight (sky).
Avoid placement near excessive moisture.
Antenna may be placed on stand.
Move antenna body until
compass direction to target
satellite aligns with triangle.
Turn on TV and set-top box
Power on PAPSA
Wait until antenna searching and positioning is completed
(approx 1 minute)
After antenna positioning is complete PAPSA will start
automatically and TV can now be viewed
If no TV picture check all conditions set-top box PAPSA and TV
Follow the above steps again
Refer to users guide.
Installation
Watching TV
Antenna Location
Setting Antenna Direction
Installation is possible where there
is clear line of sight facing north.
Terrace or similar location
Roof or similar place
Stand or similar
When adjusting position handle
only body or legs.
Power/Connect to TV
Avoid placement near
excessive moisture.
If you use single output set
top box always connect to STB-1.
SMPS
AC
Check Satellite operation/watching TV
After connecting cables
turn power switch on
Set-Top box
Coax cable
Remote
controler
TV
24V 100~240V
