SatLab Titan TAL32 Скачать руководство пользователя страница 3

Страница: 3 / 16

WARNING

• Never observe the sun through the telescope system.

• Please be careful when working around high voltage facilities.

• Do not handle staff during thunderstorms.

• Please pay attention to the spiked feet of the tripod during transportation and operation.

• The survey should be operated in a safe area.

•

Please observe local safety and trafﬁc rules.

NOTICE

• For optimum usage, this instrument should be checked and adjusted especially after being stored

for a long time or after being transported.

For further information, please refer to page 9.

• Before measuring, please check that the instrument is operating properly.

• Once work has been completed, please clean the instrument and place it in the case.

• Clean the surface, buttons, screen etc. with a soft clean cloth. Please clean the optical part with

lens paper. Do not touch the lens with your fingers.

• Please keep the instrument in the case while you transport the instrument. Please place the

instrument in the case if you are going to move it.

• Store the instrument in a dry room with consistent temperature.

• If the instrument requires repair, make sure that it is checked and repaired by Satlab technicians or

by appointed dealers.

Содержание Titan TAL32
















