ENGLISH - 20
F. Cable holder installation 2
F-2
Get controller cable, signal cables, cable holder and gland
Place the assembled cable holder inside the
tape markings. Drill three(3) 2mm holes
Fix cable holder on the vehicle roof with
three(3) of M4 x 20 screws at drill holes made
F-4
F-3
Apply sikaflex around cable holder and on the
top of the screws for waterproof
Connect cables to relative ports. Remove
electrical tape then tidy sikaflex before dry
F-6
F-5
F-1
Put the cables inside the Cable holder as above picture.
