User's Manual
User's Manual
8
9
5. System Settings
!
This menu consists of sub-menus as shown below:
System Option
AV Setting
Time Setting
Set Password
Box Information
Restore Factory Default
5.1 System Option
!
OSD Language:
Press
Left/Right
keys to select your desired
language.
!
Subtitle Language:
Select the first language to listen if this language
is supported by current subtitle data. This depends on the TV content
provider
!
Audio Language:
Select the first language to listen if this language is
supported by current program. This depends on the TV content
provider
!
Digital Audio:
Press
Left/Right
keys to select the digital audio output
mode as PCM, RAW or Off
!
Banner Time:
Set the delay time for information banner to be disappeared.
!
Recall list:
set recall list as ON or Off. If set to ON, then at watch channel mode, and press recall
key Recall list window will opened, user can choose channel which had been watched.
5.2 AV Setting
!
Aspect Ratio:
Select the TV Screen format 4:3 or 16:9 and letter box
or panscan.
!
Resolution:
Select the HD Resolution 1080i, 720p, 576p or 576i.
!
TV Format:
Select the TV mode AUTO, PAL and NTSC.
!
Video Output:
Select the Video Output CVBS or RGB
5.3 Time Setting
!
You can set your local time according your location.
!
Time Auto:
Set the receiver will get time information automatically
from the satellite or not. If set to ON, will no need set
Date
and
Time
of Box time
!
Time Zone:
Select GMT of your local area, and set the current date
and time.
!
Date:
Set box current date
!
Time:
Set Box current time
!
Sleep:
Select whether to do sleep after any times
5.4 Set Password
!
The STB provides an active system lock function which allow you to
block specific menu settings by means of a Six-digit security code.
The default password is “000000”
!
Input Old Password:
Input old system password
!
Input New Password:
Input new system password
!
Confirm Password:
Input new password again to check password
Note:
Do not forget the password. For further assitance, call your local
distributor.
5.5 Box Information
!
This menu display Software Version, Hardware Version, Date
information and SN Data.
5.6 Factory Default
!
The factory default allows user to restore the factory-reset values.
!
When you press
OK
key, the password box appears,. Input the
password, the Warning window will appear, if you select Yes, the
system setup will be rest to the default values.
Warning:
On selecting factory default you will lost all of data and
information, which was previous installed.
6. General Viewing Function
The following describes the basic function of your STB while watching TV or listenging to Radio.
6.1 Program Information
!
This section explains the general information sent by the program
provider while watching TV or listening to Radio.
!
First press
Info
key will show small amout of information.
!
Second press
Info
key will show more details of the current program.
!
When information banner is being displayed. Press
Left/Right
keys
will shows Current/Next Programme information. Press
Up/Down
keys to view to previous/next programme information.
!
Press
Info
key again to remove the banner.
Note:
Program information is not always sent with the program.
