Assembly
1. Remove HydraSonic device from box.
2. Place charging cradle on a sturdy and
level, flat surface.
3. Attach power cord to socket found at
the back of the unit.
4. Plug adapter into surge-protected outlet.
5.
Prior to the first use, charge the
HydraSonic handle for 24 hours. Place
the HydraSonic unit in the charging
cradle as shown. After about 1 second,
the charging light will light up RED
showing it’s charging. If the light does not
illuminate, turn the unit around in the
charging cradle.
DIRECTIONS FOR USE
- Attach desired brush head to handle of HydraSonic.
- If you wear makeup, remove eye makeup by hand.
- Wet your skin and the brush head with warm water.
- Liberally apply cleanser* to your skin following the 6 steps indicated on the LCD
indicator on page 5, at 15-second intervals.
- Push the On/Off button to turn your HydraSonic on.
- The unit will start at high speed.
- Tap button once to switch to low speed.
- Tap button again to pause. If no button is pressed, the unit will shut off after 2
minutes.
- Tap button again to return to high speed
- Tap and hold for 1 second to turn off.
- Gently place brush on skin and begin treatment.
- Gently move the brush using a small, circular motion beginning at the upper neck,
working side to side, moving upward towardthe forehead.
- Do not press too hard – a gentle touch is all that is needed to clean skin effectively.
* Do not use HydraSonic Professional Dermal Cleansing Technology System with
any lactic or glycolic acids or coarse or rough exfoliants.
IMPORTANT CAUTIONS AND
WARNINgS
We recommend that you
do not
share brush heads. We recommend that you
start cleansing with Satin Smooth Facial Renewal Cream Cleanser.
Do not
use
the HydraSonic with cleansers containing jagged exfoliating particles such as shells.
HydraSonic brushes may be used with soft, rounded exfoliating particles. Using the
HydraSonic to remove makeup may stain the bristles, but will not affect performance.
If discoloration occurs, clean the brush head with soap and water.
The handle and the charging cradle have no serviceable parts.
If the cord is damaged,
it must be replaced. Call Satin Smooth at 1-623-872-7037. In Canada 1-800-363-0707
or 514-780-0707 (Montréal), or email us at [email protected].
OPERATINg
INSTRUCTIONS
An adapter (CA58M), used on 100–240V AC 50/60Hz, is included. Before using the
Class 2 Power Supply, read these instructions carefully. Input: 100-240V AC 50/60Hz
0.2A Max. Output: 5.0V DC 600mA
YOUR HYDRASONIC PROFESSIONAL DERMAL CLEANSING
SYSTEM KIT CONTAINS:
1 – HydraSonic unit
1 – CA58M Adapter
1 – Charging Cradle
1 – Satin Smooth Facial Renewal Cream Cleanser AHA + Vitamin C
1 – Satin Smooth Day/Night Moisturizer Axp
33
+ Vitamin C
1 – Sensitive Facial Cleansing Brush
1 – Normal Brush
1 – Body Brush
HydraSonic is state-of-the-art technology at its best. It provides a deep sonic
cleaning of 300 movements per second of oscillating frequency, two speeds – HI and
LOW- and an LCD screen that provides a step-by-step guide to facial cleansing. The
rechargeable electric handle gives a minimum of one hour of usage time, and the
three assorted removable brush heads are easy to clean and/or change.
HydraSonic cleansing allows an effective and thorough cleaning of your skin,
removing makeup, dirt, grit and grime. It improves dry patches, blemished skin,
and large pores, and can improve skin tone and help diminish the appearance of
wrinkles.
LCD Screen
On/Off Button
Low Battery Indicator
Charging Cradle
Charging Light
3
4
SSHS1 IB-12379A.indd 5-6
4/15/14 11:06 AM
