Select Mode and choose
Scan FTA
to set the search for all
available free and unencrypted channels. Select Start Scan and
Press
OK.
Select Mode and choose
Scan FTA
to set the search for all
available free and unencrypted channels. Select Start Scan and
Press
OK.
The receiver identifies all available transponders on the satellite.
The receiver identifies all available transponders on the satellite.
Next the receiver locates all free channels.
Upon completing the scan an on-screen prompt will ask, ”
Do You
Want to Save?
”, Select
YES
and Press
OK
.
To program additional satellites enter the MENU, Select ANTENNA SETUP and chose a second
satellite from the antenna setup list (AMC4 101W). Set the LNB type to LNB-10750. Activate USALS
for the POSTIONER setting to drive the motor automatically to satellite position (AMC4). Set
TRANSPONDER to an active frequency (11822 H 5700).
Press the GREEN “ZOOM” KEY to Power Scan for all available Free TV and Radio channels on the
AMC4 Ku satellite. The receiver will automatically scan the satellite for new transponder frequencies
