®
MPD-300
WIRELESS PASSIVE
INFRARED DETECTOR
mpd300_en 03/12
The MPD-300 detector can detect motion in a protected area. It can be used in conjunction with
the MICRA alarm module with firmware version 2.02 or newer. This manual applies to the
detector with electronics version 1.2 or newer.
1. Features
Dual element pyrosensor.
Digital motion detection algorithm.
Detector signal path self-diagnostic.
Pet immunity up to 15 kg.
Digital temperature compensation.
LED
indicator.
Tamper protection in 2 ways – cover and/or detector removal.
2. Specifications
Operating frequency band...............................................................................433,05 ÷ 434,79 MHz
Radio communication range (in open area) ................................................................... up to 200 m
Battery ........................................................................................................................... CR123A 3 V
Battery life expectancy (energy save mode) ............................................................ approx. 3 years
Standby current consumption...................................................................................................90 µA
Maximum current consumption ...............................................................................................20 mA
Detectable speed.............................................................................................................. 0,3...3 m/s
Environmental class according to EN50130-5 ................................................................................ II
Operating temperature range ....................................................................................-10 °C...+55 °C
Maximum humidity.................................................................................................................. 93±3%
Recommended installation height ............................................................................................ 2,4 m
Enclosure dimensions .............................................................................................63 x 96 x 49 mm
Weight ...................................................................................................................................... 108 g
Hereby, SATEL sp. z o.o., declares that this detector is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at www.satel.eu/ce
3. Description
Motion detection or opening the tamper contact causes an alarm. Information on the alarm is
send by radio to the MICRA alarm module.
The detector can work in the following modes:
normal
– each alarm results in sending a radio transmission.
energy save
– after sending information about the alarm caused by motion detection, the next
transmission containing information on this alarm will be sent after 3 minutes at the earliest.
Tamper alarms are always sent.
