SATEL
INT-TSH2
5
The installer can add to the screen additional widgets that will indicate the alarm system
status (see “Widgets” p. 8).
Tap the screen to view the user screen.
Swipe left to start the slide show.
2.1 Slide show
The keypad can run a slide show of images, if the installer installed in the keypad a memory
card on which the images had been saved.
Tap the screen to view the user screen.
Swipe right to view the screensaver.
2.2 Trigger the panic alarm
When the screensaver or slide show is displayed, tap the screen and hold for 3 seconds to
trigger the panic alarm. The installer defines whether the alarm triggered will be loud
(signaled by the alarm system) or silent (without signaling). The silent panic alarm is useful
when the control panel reports events to the monitoring station, but unauthorized persons
should not be aware of the alarm being triggered.
3. User screens
When the screensaver or slide show is displayed, tap the screen to go to the user home
screen. Only one user screen is available in the keypad with factory default settings.
The installer can add more user screens and set one of them as the user home screen,
i.e. one that is displayed first. Swipe left / right to go to another user screen (if more user
screens were added by the installer). Information on which user screen is currently displayed
is represented graphically on the bottom of the screen.
Fig. 2. User home screen (keypad with factory default settings).
The user screen includes:
•
status bar (see p. 7),
•
widgets used to operate the alarm system, indicate the alarm system status, etc.
