2 STAM-1
TRNK
SATEL
EXPLANATIONS FOR FIGURE 1
1 -
RJ-11 connector (RS-TTL port) for trunking radiotelephone.
Data signals from the RS-TTL port of radiotelephone should be supplied to the
following RJ-11 contacts:
1 -
TX
2 -
RX
4, 6
- common ground
3, 5
- not connected
2
-
Four pairs of pins to set individual address of the card.
Particular pin pairs have the following weight: JP10 – weight 1; JP11 – weight 2;
JP12 – weight 4; JP13 – weight 8. To calculate the value of the address set, add
together the weights of pins on which jumpers are placed (e.g. the card address
shown in the figure is equal to 5).
3 -
Input socket to connect the main card / expansion card.
4 -
Output socket to connect a next expansion card, or final card.
5 - Buzzer.
6 -
DB-9 connector (port RS-232) for trunking radiotelephone or GSM-4 module. You
can connect the GSM-4 module to the card by using the typical cable, used for
programming the CA-10, CA-64 or INTEGRA control panels from a computer.
The RS-232 port radiotelephone, depending on the data signal output, requires
installation of a special cable. The signals should be supplied to the following
contacts in the DB-9 connector:
2 -
RX
3 -
TX
5
- common ground
1, 4, 6, 7, 8, 9 - not connected
The card is designed for installation in the PCI slot of computer, using the computer's RESET
signal and the +12V supply input contacts. Data for the main card and the STAM-1 program
are transmitted by means of an external cable (through socket 3).
The card requires no additional configuration – it recognizes automatically the type of
connected equipment (radiotelephone / GSM module) and is ready to use after appropriate
connections are made.
NOTE:
The card only accepts one device (radiotelephone or GSM module of SATEL's
manufacture) connected to one of the following ports: RS-TTL (0V, +5V) or RS-
232 (-12V, +12V).
TECHNICAL DATA
Supply voltage (±10%) .................................................................................................. 12V DC
Current consumption........................................................................................................ 40mA
Installation in computer ................................................................................................. PCI slot
SATEL sp. z o.o.
ul. Schuberta 79
80-
172 Gda
ń
sk
POLAND
tel. +48 58 320 94 00
www.satel.pl
The latest EC declaration of conformity
and product approval certificates are
available for downloading on our
website www.satel.pl
