SATEL MKP-300
3
4.1 Changing own code
1. Press in turn the
and
keys. 2 short beeps will confirm starting the function. The
LED will start blinking.
2. Enter the current code. 2 short beeps will confirm the correct code entry. The LED will start
blinking.
3. Enter the new code and confirm with the
key (or press the
key to cancel changing the
code). 4 short beeps followed by 1 long beep will confirm the change of code.
4.2 Adding new code
1. Press the key with digit corresponding to the number of code to be added (if a code with this
number already exists, it will be changed).
2. Press the
key. 2 short beeps will confirm starting the function. The
LED will start
blinking.
3. Enter the administrator code. 2 short beeps will confirm the correct code entry. The LED will
start blinking.
4. Enter the new code and confirm with the
key (or press the
to cancel adding the code).
4 short beeps followed by 1 long beep will confirm the addition of new code.
4.3 Deleting code
1. Press the key with digit corresponding to the number of code to be deleted.
2. Press the
key. 2 short beeps will confirm starting the function. The
LED will start
blinking.
3. Enter the administrator code. 2 short beeps will confirm the proper code entry. The LED will
start blinking.
4. Enter
0000
and confirm with the
key (or press the
key to cancel deleting the code).
4 short beeps followed by 1 long beep will confirm the deletion of code.
5. Security system operation
After registration in the MICRA module, the keypad will let you arm or disarm the system and clear
alarms. The functions of output control and alarm triggering are available if the MICRA module is
configured accordingly by the installer.
5.1 Arming
Enter the code and then press the
key. Sending the arming command will be confirmed by 3
short beeps and the
LED coming on.
5.2 Disarming and alarm clearing
Enter the code and then press the
key. Sending the disarming / alarm clearing command will be
confirmed by 3 short beeps and the LED coming on.
5.3 Output control
1. Press and hold down for about 3 seconds the key to which the control function is assigned (the
installer can assign the control function to keys 1-4). 2 short beeps will confirm starting the
function. The
and LEDs will start blinking.
2. Enter the code. 4 short beeps followed by 1 long beep will confirm the sending of control
command.
