SATEL
INT-S-GR / INT-S-BL
6
Silent
PANIC alarm
- with this option selected, triggering the panic alarm from the keypad
will not set off the loud signaling; instead, a message will be sent to the monitoring
station and the output type 12 (
SILENT ALARM
) will be activated.
Alarm 3 incorrect codes
[3 wrong codes] - entering a code unknown to the control panel
three times will trigger alarm.
Options
Quick arming
- arming by pressing successively the [0] and [#] keys.
Control BI
output
– the keypad accepts the "
BI output control
" type of codes.
Control MONO
output
– the keypad accepts the "
MONO output control
" type of codes
.
Partition blocking
- entering the guard code when the partition is armed will temporarily
bypass the partition.
Guard round control
- entering the guard code ([CODE][#] or [CODE][*]) will be recorded
as completion of the round.
Changing access code
- this option enables the function of the user code changing.
Signaling
Alarm signaling (fixed time)
- acoustic alarm signaling in the given partition (through the
total duration of alarm).
Alarm signaling (latch)
- acoustic alarm signaling in the given partition until the alarm is
cleared.
Signaling entry delay
- acoustic signaling of the countdown of entry delay time.
Signaling exit delay
- acoustic signaling of the countdown of exit delay time.
Auto-Arm delay countdown
– the keypad will be acoustically signaling the countdown of
the auto-arming delay in the partition it has been assigned to.
Access code signaling (hardware)
– enabling this option will activate the signaling of
code entry acknowledgement, which is independent of the control panel. The option is
useful in expanded alarm systems, because of a considerable time lag between
entering the code and generating the audible signal by the control panel. Option is
available only in the INTEGRA control panel.
Confirming
- this option defines the way of communication between the control panel and
the partition keypad user:
No
– the function of keypad operation acknowledgement is disabled.
Sound
- the keypad will generate beeps as described in the user manual for the alarm
control panel.
Backlight
- the audible signaling will be replaced by the blinking keypad illumination as
described in the user manual for the alarm control panel.
Backlight
- defines the mode of keypad illumination
No
- keypad backlighting disabled.
Auto
- keypad backlighting goes on automatically on pressing any key; the function has
additional options
(submenu „Auto-backlight” in LCD keypad):
-
no auto-backlight
- illumination only activated by pressing one of the keys,
-
zone violation
- backlighting activated by pressing a key or by violation of the zone,
-
entry delay, part
.
- backlighting activated by pressing a key or by starting the
countdown of entry delay time in the indicated partition.
Note:
Automatic keypad illumination is ON for approx. 40 seconds from the moment of its
activation or from the last press of any key.
