manualshive.com logo in svg

Satel Compact-4BT, Руководство пользователя, Страница: 14 / 30

Поделиться
Скачать
Satel Compact-4BT Скачать руководство пользователя страница 14

 

 

SATEL Compact-4BT User Guide 

 

 

Version 1.5B 

 

 

14

 

SATEL Compact-4BT is possible to set to a Bluetooth remote mode. Remote mode allow users to 

switch on the device remotely only by creating a connection to Bluetooth. To set the device to a 

remote mode Bluetooth should be enabled when the device is off by pushing the Bluetooth 

button for three seconds. 

 

Notice that Bluetooth uses an internal antenna, so no external antenna is required. Bluetooth 

antenna is positioned on a bottom of the device so for the best performance the internal 

antenna should not be blocked or screened by metal objects set close to the housing. 

 

6.6

 

Data transfer via SATEL Compact-4BT 

 

Data can be sent via Bluetooth, USB or RS-232 which are ON simultaneously so no extra setting 

is needed to choose which port shall be opened, choosing the data port is done by selecting the 

dedicated cable. 

 

If Bluetooth port is used for data transmission USB and RS-232 ports are also operational. User 

should not send data to two different ports simultaneously as this might corrupt the data.   

All serial ports including Bluetooth do not output or pass through data to other serial ports, all 

data input is directed to internal UHF modem. 

 

If Bluetooth data transmission is required Bluetooth must first pair and connect with SATEL 

Compact-4BT. 

 

 

6.7

 

Charging the battery 

 

SATEL Compact-4BT contains a Li-Ion battery which can be charged from external DC supply. 

The device can be operated either battery powered or external DC supply powered. During the 

external DC supply internal battery is charged. This influence the power consumption from the 

external source up till 2 Amps @ 12V. When external DC supply is connected all power is 

drained from that source. After battery is fully charged the external DC supply will continue to 

feed the device hence not draining the battery. DC supply can be disconnected at any time or it 

can be left connected all times.  

 

When external DC supply is connected Battery LED will illuminate Green or blinking Green when 

charging is ongoing. 

   

If during the charging Red LED starts blinking there is an internal error in charging process. Error 

can occur in a following circumstances; charging temperature is too low or high, maximum 

charging time has exceeded, battery absent or defect. In a case of error occurrence assure that 

the device is in a proper temperature range. Notice that inner temperature may be different than 

outside, or the device may take a while to cool down or heat up. If charging takes too long or 

behaves not normal, battery may be defect. In this case contact manufacturer for further 

instructions.  

Содержание Compact-4BT































Отзывы:

Нет отзывов