Satel APS-30 S, Руководство пользователя

Страница: 3 / 8

SATEL APS-30 S 3
Terminals
AC
– power input (17-24 VAC).
COM
– common ground.
+12V
– power output (13.6-13.8 VDC).
AWS
– OC type output to indicate the loss of 230 VAC power.
AWB
– OC type output to indicate low voltage or failure of the battery.
In the normal state, the OC type outputs are shorted to ground (0 V), but when a trouble
occurs, the output is disconnected from ground.
3. Configuring the power supply
Beeper for signaling trouble
You can enable / disable the acoustic signaling of trouble (Fig. 2):

jumper on
– signaling enabled,

jumper off
– signaling disabled.
Delay of AC power failure reporting
You can select the time that must pass after AC power loss before the AWS output turns on.
Available settings are shown in Fig. 3.