The AOD-210 outdoor detector can detect motion in a protected area. It is designed for
operation within the ABAX 2 / ABAX two-way wireless system. This manual applies to the
detector with firmware version 1.00 (or newer), which is supported by:
ABAX
2:
– ACU-220
/
ACU-280 controller,
– ARU-200 repeater.
ABAX:
– ACU-120 / ACU-270 controller (firmware version 5.04 or newer),
– ARU-100 repeater (firmware version 2.02 or newer),
– INTEGRA 128-WRL control panel (firmware version 1.19 or newer and firmware
version of processor used to operate ABAX system 3.10 or newer).
1 Features
Passive infrared (PIR) sensor and microwave sensor.
Adjustable
detection
sensitivity of both sensors.
Digital motion detection algorithm for both sensors.
Digital
temperature compensation.
Pet immunity up to 20 kg.
Immunity to false alarms caused by moving but not changing their position objects (eg.
branches of trees).
Creep
zone.
Dusk
sensor.
Encrypted two-way radio communication in the 868 MHz frequency band (AES standard
for the ABAX 2 system).
Transmission channel diversity – 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 868 MHz frequency
band (ABAX 2 system only).
Remote update of detector firmware (ABAX 2 system only).
Remote
configuration.
Built-in temperature sensor (temperature measurement range from -40°C to +55°C).
Three
LED
indicators.
Supervision of motion detection system.
“ECO” option for longer battery life (ABAX 2 system only).
Battery status control.
Tamper protection against enclosure opening and removal from mounting surface.
Weatherproof enclosure featuring a very high mechanical strength.
2 Description
The detector occupies two positions on the device list:
the first one: motion detector,
the other one: dusk detector.
Optionally the detector can occupy one position – only the motion detector is supported.