The AOCD-260 detector can detect motion at the moment of crossing the perimeter of
protected area. It can be a component of perimeter protection. It is designed for operation
within the ABAX 2 / ABAX two-way wireless system. This manual applies to the detector with
firmware version 1.00, which is supported by:
ABAX
2:
– ACU-220
/
ACU-280 controller,
– ARU-200 repeater.
ABAX:
– ACU-120 / ACU-270 controller (firmware version 5.04 or newer),
– ARU-100 repeater (firmware version 2.02 or newer),
– INTEGRA 128-WRL control panel (firmware version 1.19 or newer and firmware
version of processor used to operate ABAX system 3.10 or newer).
1 Features
Passive infrared (PIR) sensor and microwave sensor.
Adjustable
detection
sensitivity of both sensors.
Digital motion detection algorithm for both sensors.
Digital
temperature compensation.
Encrypted two-way radio communication in the 868 MHz frequency band (AES standard
for the ABAX 2 system).
Transmission channel diversity – 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 868 MHz frequency
band (ABAX 2 system only).
Remote update of detector firmware (ABAX 2 system only).
Remote
configuration.
Built-in temperature sensor (temperature measurement range from -40°C to +55°C).
Tricolor LED indicator.
Supervision of motion detection system.
“ECO” option for longer battery life (ABAX 2 system only).
Battery status control.
Tamper protection against enclosure opening and removal from mounting surface.
Weatherproof enclosure featuring a very high mechanical strength.
Angle-type mounting bracket included.
2 Description
Radio communication
The detector connects to the controller / control panel at regular time intervals to provide
information about its state (periodical communication). Additional communication may take
place as a result of alarm (see “Operating modes”).