14 ACU-120
SATEL
7. A message will be displayed to inform you that the expander identification function has
been started.
8. After the devices have been identified, a new name of the zone will be displayed. You can
change it. The same name will also be given to an output, if the device is to be assigned
to the output. Press to save the name. If the device occupies two or more zones, the
procedure of giving them a name will be repeated for each of them.
Removing wireless devices
DLOADX program
You can remove wireless devices in the “Structure” window, “Hardware” tab, after clicking on
the controller name in the list of devices.
1. Click on the “Read” button. The data related to wireless devices will be read from the
controller (these data are not read after clicking on the
button in the main menu).
2. Click on the device you want to remove (if the device occupies two or more positions on
the list, you can click on any of them).
3. Click on the “Delete”
button. The “Confirm” window will open.
4. Click on the “Yes” button. The “Confirm” window will close.
5. Click on the “Write” button. The device will be removed from the controller.
Having removed a wireless device, start the expansion module identification function.
LCD keypad
You can remove a wireless device in the service mode, using the R
EMOVE DEVICE
function
(
S
TRUCTURE
H
ARDWARE
E
XPANDERS
S
ETTINGS
[controller name]
R
EMOVE DEVICE
).
1. Start the R
EMOVE DEVICE
function.
2. Using the
and
keys, select the zone to which the device you want to remove is
assigned, and then press .
3. A prompt will appear on the display asking you whether the device is to be removed (the
device type and serial number will be shown). Press the key 1. The device will be deleted.
4. A message on the display will inform you that the expander identification function has
been started. After identification of the devices, return to the R
EMOVE DEVICE
function will
follow.
7.2.2 Work with the VERSA / VERSA Plus / VERSA IP control panels
The VERSA / VERSA Plus / VERSA IP control panels can support up to 30 wireless devices.
For information about operation of the ABAX system controller with the control panels, as
well as adding and removing wireless devices, please refer to the installer manual of
respective control panels.
7.3 Programming the wireless devices
7.3.1 Parameters and options
Filter
– the number of consecutive response periods, during which communication with the
device failed to be established, for the loss of communication with the device to be
reported. Values from the 0 to 50 range can be entered. Entering the digit 0 will disable
control of the device presence in the system.
In the case of the AMD-103 magnetic contact and ASP-100 siren, the presence check
is performed in a different way than for the other ABAX system devices. If the value
programmed for the F
ILTER
parameter differs from 0, the lack of presence will be