SATEL
ACCO-KP2
18
the user tries again to enter or exit
– the “Anti Passback” option is enabled,
the module operates in the mantrap / airlock configuration and the other door is open,
the reader is blocked by the “Anti-Scanner” function.
7.3 Other functions
The following functions are available when the door status is controlled.
7.3.1 Blocking the door
1. If the LED is ON in green (the door operates in the normal mode), make sure that the
door is closed.
2. Tap the iButton on the reader and hold it for about 3 seconds. The door will be blocked.
The LED will start flashing slowly in red.
7.3.2 Unblocking the door
1. If the LED is ON in green (the door operates in the normal mode), get access and open
the door (see p. 17).
2. Tap the iButton on the reader and hold it for about 3 seconds. The door will be unblocked.
The LED will start flashing slowly in green.
7.3.3 Restoring the door to normal operation mode
If the LED is flashing slowly in red (door blocked) or in green (door unblocked), tap the
iButton on the reader and hold for about 3 seconds. The door will switch to normal operation
mode. The LED will turn ON in green.
8. Unlock button
The installer can connect to the module a button or a different device (e.g. a detector)
intended to unlock the door. In such case, the door is unlocked without the need to identify
the user by the module. This solution can be used e.g. for leaving the premises (when the
entry to the premises is controlled but the exit is not) or when access is granted by the
doorman.
9. Other ways to block the door
The door can also be blocked in one of the following ways:
after the module input programmed as “Door blocking” is activated (e.g. by using a switch),
after the module input programmed as “Alarm – block door” is activated (e.g. by using
a control panel output),
If the door has been blocked by means of
the “Alarm – block door” type of input,
the door status can only be changed by the user by means of the terminal.
automatically, at a specific time (it can be programmed in the module since when and until
when the door is to be blocked),
automatically, according to the access schedule (the schedule defines at what times the
door is to be blocked).