LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on the instrument for faulty
workmanship or parts from date of dispatch from the distributor. In all cases, this warranty is valid for
36 months from the date of production. This warranty is on a return to factory basis.
The manufacturer does not accept liability for any damage caused by instrument malfunction. The
manufacturer accepts no responsibility for the suitability of the instrument to the application for which
it was purchased.
Failure to install, set up or operate the instrument according to the instructions herein will void the
warranty.
Your instrument may be opened only by a duly authorized representative of the manufacturer. The
unit should only be opened in a fully anti-static environment. Failure to do so may damage the
electronic components and will void the warranty.
NOTE
The greatest care has been taken to manufacture and calibrate your equipment. However, these
instructions do not cover all possible contingencies that may arise during installation, operation or
maintenance, and all details and variations of this equipment are not covered by these instructions.
For additional information regarding installation, operation or maintenance of this equipment, contact
the manufacturer or your local representative or distributor.
IMPORTANT
F
Ensure
that all incoming AC power and other power sources are turned OFF before performing
any work on the unit. Failure to do so may result in serious or even fatal injury and/or
equipment damage.
F
Before
connecting the unit to the power source, check the label on the
rear to ensure that your
unit is equipped with the appropriate power supply.
F
D o n o t
connect the unit to
a p o w e r
source
if it is damaged.
F
Do not
expose the
unit to
rain or moisture.
F
Read this manual
thoroughly before connecting the unit.
Table of Contents
1 Introduction .......................................................................................... 1
2 Field Setting ...........................................................................................................................3
2.1
Default Setting.................................................................................................................3
2.2
Changing the Communication Parameters (Firmware Version 0.10) .................3
3 Installation..............................................................................................................................5
3.1
Mechanical Installation..................................................................................................5
3.2
Electrical Installation......................................................................................................6
4 Operation................................................................................................................................9
4.1
Power Up .........................................................................................................................9
4.2
Communication ..............................................................................................................9
5 Technical Specifications ....................................................................................................11
BG0259 Rev A5
