manualshive.com logo in svg

Satcom Resources BC1X00, Руководство по установке

Поделиться
Скачать
Satcom Resources BC1X00 Скачать руководство пользователя страница 9

BC1X00 hardware

  8

2. 8  Optional rackmounting procedure

Rackmounting kits may be used to mount two BC1X00 units side by side in a 19” rack.  The 
kit, part number 80-05-256, has a recessed plate to permit cable or fibre bends to be made 
within the envelope of the 19” cabinet.  It has a cut out to provide access to all the connectors 
on the rear panel of the BC1X00.

Figure 2. 4 Twin unit rack mounting

To install the BC1X00 first remove the two rear panel screws securing the unit lid.  Fasten 
the BC1X00 into the rack mount adaptor plate using the screws just removed.  Then secure 
the rack mounting plate complete with one or two BC1X00 units into the 19” rack using the 
locating holes at the ends of the adaptor plate. Ensure that the bit switches are set correctly 
before installing the rack mount kit.

2. 9 

 

Power up the BC1X00.

The unit requires 100-250 VAC, 50-60 Hz AC supply. An alternative -48VDC power supply 
is available as a custom order item for all models. See Section 2 for further details of power 
consumption. 

When the power supply is connected, the green PWR LED on the rear panel should be ON 
to indicate that the unit is operational. If the LED is OFF, mains power is not being supplied 
to the unit.

Recessed space to accommodate fibre bends

BC1100

BC1000

Part No: 80-05-256

Made in

    UK

   HSSI DCE (To Router)

   EIA-644/LVDS DTE)

Pin1

-48V

Pin3

0V

L

__

Made in

    UK

   HSSI DTE (To Modem)

   EIA-644/LVDS DCE)

Содержание BC1X00

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды