Satco STARFISH S11267, Руководство по установке

Страница: 3 / 54

WARNING:
This product may represent a
possible shock or fi re hazard if
improperly installed or attached in
any way. Product should be installed
in accordance with the owner’s
manual, current electrical codes
and/or the current National Electric
Code (NEC).
CAUTION: RISK OF
ELECTRIC SHOCK.
- TURN OFF THE MAIN POWER AT
THE CIRCUIT BREAKER BEFORE
INSTALLING.
CAUTION: RISK OF FIRE.
- FOR CONTROL OF
INCANDESCENT, CFL, LED
AND RESISTIVE LOADS
AS WELL AS MOTORS
- DO NOT USE WITH
CONTROL RECEPTACLE
OUTLETS,FLUORESCENT
LIGHTING FIXTURES,
- DO NOT EXCEED
ELECTRICAL RATINGS.
- USE INDOORS ONLY.
- SHALL INSTALL IN A METALLIC
OUTLET BOX HAVING MIN. WIDTH
50MM, OR A NON-METALLIC BOX.
- ONLY USE WITH SOLID COPPER
WIRE OR COPPER-CLAD WIRE.
CAUTION:
- INSTALLATION REQUIRES A
NEUTRAL WIRE.
- THIS DEVICE DOES NOT WORK
WITH SMART LAMPS.
REPLACING LIGHT BULBS.
- Make sure switches are in OFF
position (no light level indicator
lights are lit)
- To ensure there is no power at the
socket when replacing light bulbs,
turn off power at circuit breaker
or fuse.
FCC/IC INFORMATION
This device complies with part 15 of
the FCC Rules and Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following
two conditions: (1) This device may
not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation.
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between
the equipment and receiver.
- Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an
experienced radio/TV technician
for help.