background image

SATAjet B, SATAjet GR | 5

EN

Note!

The procedures mentioned below will damage the paint spray 

gun/system and may lead to expiry of the explosion proofness 

certificate as well as total loss of any waranty:
•  Immersing the paint spray gun in solvent or cleaning agents, 

or for a period longer than required for the cleaning process 

as such

•  Failure to remove the paint spray gun from the gun washing 

machine after finishing the cleaning process

•  Cleaning the paint spray gun by means of ultrasound clean-

ing systems

Warning! Attention!

When using solvents and cleaning agents based on halogen-

ated hydrocarbons e.g. 1.1.1-trichlorethylene and methylene 

chloride, chemical reactions can occur on the aluminium cup, 

gun and on galvanized components (small quantities of water 

added to 1.1.1-trichlorethyelene produce hydrochloric acid). 

This can cause oxidation of the components; in extreme cases, 

the reaction can be explosive.
Therefore only use solvents andcleaning agents for your paint 

gun which do not contain the substances named above. You 

must never use acid, alkaline solutions / Iye or stripping agents 

for cleaning.

6. Troubleshooting

Malfunction

Cause

Corrective Action

Paint spray gun 

leaks from fluid tip.

Foreign substances 

between fluid tip 

and needle prevent 

sealing.

Remove and clean 

fluid needle and 

fluid nozzle or use 

new nozzle set.

Paint emerges from 

fluid needle - nee-

dle sealing.

Self tensioning 

needle sealing 

damaged or lost.

Replace needle 

sealing.

Paint spray flutters. Too little material 

in cup, fluid noz-

zle not tight self-

adjusting, needle 

sealing damaged, 

nozzle set dirty or 

damaged.

Refill material, 

tighten parts, if 

necessary clean or 

replace parts.

Material bubbles or 

„boils“ in paint cup.

Atomization air 

flows through the 

paint channel 

to the cup. The 

paint nozzle is not 

sufficiently tight-

ened. Air nozzle 

is not completely 

screwed on, the air 

net clogged.

Tighten parts 

accordingly, clean 

or replace.

7. Warranty

During the period of twelve (12) months from the date of original 

purchase Würth will repair or, replace the product without charge 

for parts or labour subject to the following conditions.

The warranty covers the value for production parts or defects in 

material during the warranty period. The warranty does not include 

damages caused by improper handling, normal wear and tear, 

mechanical damages, faulty assembly, improper maintenance, 

unusual spray materials, substitute materials, chemicals such as 

alkaline solutions and acids, electro-chemical or electric influences, 

as far as this damage is not the result of any error committed by us. 

Abrasive spray material such as red lead and liquid grinding material 

etc. reduce the lifetime of valves, packings, guns and nozzles. Wear 

and tear damage caused by this are not covered in this warranty. 

Units should be inspected upon delivery by the consumer. 

Obvious damage must be reported within 14 days of receipt of 

the unit to the supplier to avoid loss of the right to claim notice 

of defects.

Additional claims such as compensation are excluded. This 

refers as well to damages caused during meetings , training ses-

sions, or demonstrations. Should the consumer require immedi-

ate repair or replacement before a determination of whether 

the affected unit is covered by the warranty, the repair or the 

replacement will be made and charged at the current prices. If it 

is determind that the item is covered by the warranty, a credit will 

be issued for the repair or replacement. Replaced parts become 

the property of Würth or their distributor.

Notice of defects or other claims do not entitle  the consumer to 

delay or refuse payment.

Returned merchandise to SATA must be sent prepaid. All service 

charges, freight and handling charges are to be paid by the con-

sumer. The charges made will be in line with currently existing 

pricing. Suretyships may not prolong the warranty period. This 

warranty terminates upon unauthourised inference.

Содержание SATAjet B











Отзывы: