SATA satajet 1000 b, Руководство по эксплуатации

Страница: 487 / 512

487
US
SATAjet 1000 B (RP/HVLP) Operating Instructions SATAjet 1000 B (RP/HVLP) Operating Instructions
Danger! Risk of explosion!
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenized
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
7. Use
Danger! Risk of explosion!
• Use only solvent-resistant, antistatic, undamaged and technically
flawless compressed air hoses with a permanent pressure resistance
of minimum 10 bar / 145 psi, e.g. Art. No. 53090 !
Information!
The following requirements must be fulfilled:
• Compressed air connection 1/4" male thread or a suitable SATA con-
nection nipple.
• Ensure minimum compressed air volume (air consumption) and pres-
sure (recommended spray gun inlet pressure) according to chapter 2.
• Use clean compressed air, e.g. by installing the SATA filter 484, Art.
No. 92320
• Use an air hose with minimum 9 mm inner diameter (see warnings),
e.g. Art. No. 53090 .
Before using observe/check the following points / to ensure safe operation
of the paint spray gun:
■ All screws [2-1] , [2-2] , [2-3] , [2-4] and [2-5] are securely attached.
Tighten screws, if necessary.
■ Paint nozzle [2-2] tightened with a tightening torque of 14 Nm [7-5] .
■ Locking screw [10-1] tightened.
■ Technically clean compressed air used.
143842-BAL-SATAjet 1000 B.indb 487 31.10.2019 13:23:33