SATA 97924, Руководство пользователя

Страница: 11 / 60

中文
EN DE RU KO PT JA ES 97924
11
Setting Application
Gear II
Dry tonal specimens, joint sealants, mucilage glue, construction joints and plaster models.
Dry wet wood.
Remove stickers.
Catalyze such adhesives as contact adhesives on bonding surfaces, activate adhesives to
accelerate the gluing process, melt away bonding points and remove or attach plastic film
along plate edges.
Wax and dewax.
Shrink packages and insulated PVC pipe.
Melt frozen steps, door locks, trunk lids, doors and water pipes. Remove frost deposits from
refrigerators and freezers.
Gear III
Weld plastic.
Bend plastic pipes and sheets.
Weld tin, special silver solder, SMD building elements and cable terminals, and desolder tin
joints.
Loosen rusty or fixed nuts and tighten bolts.
Remove old and thick grease, paint scale and plaster.
Livestock sheds may be quickly sterilized with hot air at 600
℃
. In addition, it may be used
to effectively cope with xylophagous insects
（
note: this machine has a risk of fire. Wooden
surfaces must not be overheated
）
.
If the temperature is not set correctly, first set the hot air gun to a low temperature and gradually increase the temperature until the
best results are obtained.
7.1 Installation of correct accessories
（
optional
）
Image Description Purpose
Economic shovel-shaped nozzle
Protect glass when peeling stickers from
window frames.
Economic reflector nozzle Welding soft fiber tubes.
Economic round nozzle Welding and shrinking the film
（
low heat
）
Economic wide-slot nozzle Drying and melting
（
high heat
）
.
Economic scraper Scraping off paint to clean surfaces.
Make sure that the hot air gun is turned off and the nozzle has cooled down.
A fallen nozzle may ignite other items. Ensure that the nozzle is fixed securely to the machine.
Touching a hot nozzle may cause severe burns. Install or replace the nozzle after the machine has completely cooled down or using the