SATA 97820, Руководство пользователя

Страница: 12 / 72

中文
EN DE RU KO PT JA ES 97820
12
4
）
Overloading of the jack is prohibited. The liability for accidents caused by such operations is not covered by insurance.
5
）
Unbalanced loading is prohibited and it is not allowed to lift the vehicle in a tilting manner, otherwise it will be dangerous and the
jack and the vehicle may be damaged.
6
）
Brake the vehicle and shut off the engine before operation.
7
）
Confirm that the support surface is hard and level before operation, otherwise there may be danger.
8
）
The jack can only be used for jacking and cannot be used for supporting, and a matching jack support must be used to support the
vehicle immediately after jacking.
9
）
The jack tray must be carefully aligned with the support point on the vehicle chassis first, and the vehicle can be raised with the jack.
10
）
The handle shall not be turned during jacking, otherwise the oil return valve will be unscrewed, resulting in lowering of jack tray.
11
）
The vehicle shall not be moved during operation.
12
）
For lowering of the jack, the handle must be turned counterclockwise slowly to lower the vehicle slowly.
13
）
Do not work on, under or around the vehicle supported only with the jack.
14
）
Do not disassemble or refit the jack by yourself.
15
）
The safety valve cannot be adjusted by the user. The liability for accidents caused by such operations is not covered by insurance.
16
）
The operator must wear goggles and working gloves conforming to relevant national safety regulations during operation.
Chapter II Product illustration
Note:
The oil pump of the product is filled with 15# mechanical oil at delivery. It is recommended to use 10# aircraft hydraulic oil if the
product is often used below 0
℃
. During change, please discharge all the 15# mechanical oil out from the oil pump, and then
add the 10# aircraft hydraulic oil. For specific operation, please refer to page 3
Rubber tray
Handle
Dual hydraulic pump
Safety valve screw
（
Do not remove it for
pressure regulation
without authorization
）
Oil filler screw
Hydraulic pump
Figure 1
Figure 2
Universal joint