SATA 51075C, Инструкция по эксплуатации, Страница: 13 / 20

13 V_SC_51075C_202104
15) Never place waste battery packs in fire or
dispose of them with domestic waste. They
must be sent to the local collection center
or recycling center for recycling.
16) Before tightening screws or drilling holes
in walls, floors or ceilings, carefully check
whether wires, cables, natural gas pipelines
or water pipes are laid so as to avoid
rupturing them with screws or drill bits.
17) It is necessary to wear ear protectors when
using the tool. Failure to do so may result in
hearing damage.
18) It is normal for accessories and metal parts
to heat up when the machine tool is being
used.
19) When the machine tool is in operation, it
may make contact with concealed hidden
wires. To avoid this, make sure you hold it
steadily by its insulation surface. Contact
with live wires will electrify the metal on the
surface of the tool and cause the operator
to suffer an electric shock.
WARNING
The battery pack leak liquid if the temperature is
too high or it is overused. If the skin is stained with
liquid from the battery electrolytes, wash with soap
and rinse with lemon juice or vinegar. If the liquid is
splashed into the eyes, immediately rinse with water
and go to the hospital for examination and treatment.
Safety precautions for charger:
1. Please read the instructions carefully
before use.
2. Use it only indoors. Do not expose it to rain
or water.
3. Do not charge non-rechargeable batteries.
4. If the flexible power line is damaged, it shall
be replaced by a professional technician
from the manufacturer, its maintenance
department or similar department so as to
avoid safety hazards.