SATA 51011C, Инструкция по эксплуатации, Страница: 15 / 20

15 V_SC_51011C_202104
OPERATION GUIDELINE
Before the use
1) Charging
This charger and machine shall be used
together. Do not use other chargers.
The machine has a protection circuit. When the
battery is low, the protection circuit is turned on
and the machine stops rotating.
The machine may become hot under the high
temperatures or after a long period of operation.
At this time, do not charge immediately but wait
until the battery is cooled. Otherwise, the service
life of battery will be shortened or the charging
failure may be caused due to overheating.
For the first charging or after a long period of
storage, the efficiency of first charging may
only reach about 60%. After 2-3 charging and
discharging cycles, the battery efficiency may
reach 100%.
2) Installation and removal of battery pack (see
Figure A)
Press the lock buttons on both sides of battery
pack and pull it out. To insert the battery pack,
simply push it into the machine. Avoid the
excessive force.
OPERATION
1. Start/stop (see Figure B)
Press and hold the switch (1) to start the
machine, and release it to stop the machine.
The switch has the brake function. When the
switch is released, the chuck stops rotating
immediately.
Change the force applied to the switch to
Caution: Please read the instruction
carefully before operating the
machine.
1
3
2
C
E F
D
B A