SATA 05211, Руководство пользователя

Страница: 9 / 36

中文
EN DE RU KO PT JA ES 05211/05212
9
Assembly:
The glue gun is intended for the quick gluing of clean, dry and grease-free materials with glue heated to its melting point:
PICTURE la PICTURE 2 b/3c
1
）
Nozzle 6
）
With indicator switch
（
Figure 1c
）
2
）
Glue stick 7
）
Detachable cord
3
）
Feed trigger 8
）
Exchangeable nozzle
4
）
Stand 9
）
Replaceable nozzle
5
）
Power switch
Instructions for switching machines:
Turn on the machine: Plug the power cord into a 220 volt power source
05211 Model:
1
）
Press the main switch to turn on the machine and start heating.
2
）
When the power is plugged in, the glue gun turns on and heats up.
05212 Model:
1
）
Connect the power cord to the glue gun.
2
）
Switch the glue un on with the main switch. Indicator light
（
6
）
will let you know the glue gun is on and heating.
Shut down:
1
）
Disconnect the power plug
（
model 05211
）
.
2
）
Press the main switch
（
model 05212
）
and unplug the power plug.
Allow the unit to cool completely before storing. The hot nozzle can cause damage.
GETTING STARTED:
PREPARATIONS FOR GLUING:
1
）
The surfaces to be glued must be clean, dry and free of grease. Roughen smooth surfaces before gluing. DO NOT USE INFLAMMABLE
SOLVENTS FOR CLEANING! The ambient temperature and the work piece to be glued must not be colder than +!
°
C or warmer than
+50
°
C. Warm rapidly cooling materials
（
e.g. steel
）
for better adhesion.
GLUING
：
1
）
DANGER OF BURNING! The glue and the nozzle tip
（
1
）
become very hot. Do not allow the nozzle tip or hot glue to come into contact
with persons or animals. If hot glue touches the skin, immediately hold the spot for some minutes under a stream of cold water. Do
not try to remove the glue from the skin.
Models : 05211:
1
）
Allow glue gun to reach operating temperatures before using
（
+/- 5mins
）
. Insert the glue stick
（
2
）
. Press the feed trigger
（
3
）
.
Model: 05212:
1
）
Once the cord is detached, the glue gun remains operable for 5mins, before it needs o heat up.
NOTE: For your first use, you may need to load up to two full glue sticks before glue begins to flow.
2
）
Squeeze trigger
（
3
）
to apply glue onto desired surface.
Apply parts together.