SATA 05157, Руководство пользователя, Страница: 17 / 112

中文
EN DE RU KO PT JA ES 51325/05157
17
5
）
Make sure that the cutter head is fixed before operation.
6
）
During normal operation, the tool will vibrate, causing loosening of the screws on the tool, which will cause machine failure or
accident. So please carefully check the tightness of screws before operation.
7
）
When you encounter cold weather or do not use this tool for a long time, please preheat the tool for a period of time by idling
operation. This operation will thaw the lube oil. If there is no proper preheating, the pickaxe is difficult to run smoothly.
8
）
Keep your feet stable during operation. When operating at high places, you should confirm that there is no one below.
9
）
Please hold the tool with both hands.
10
）
Please keep your hands away from the moving parts of the tool.
11
）
Do not allow the tool to run on its own, only when fixed by hands.
12
）
Do not use tools to point to anyone in the operation area. The head of the knife may fly out and seriously damage other people.
13
）
Do not touch the parts near the cutting edge or the edge of the knife immediately after operation. They may be very hot and cause
your skin to burn.
14
）
Some materials may contain toxic chemicals. Be sure to pay attention to the prevention of dust inhalation and skin contact. Please
follow the safety data provided by the material supplier.
Instructions:
Note:
Before you adjust or check the function of the tool, make sure to turn off the tool and plug out power supply
Note:
Before plug in the power supply, make sure that the trigger switch is able to move freely and return to the "OFF" position after
release. The trigger can be activated by pulling the trigger switch, and the tool can be stopped when the trigger switch is
released
Trigger Switch
A c t i o n m o d e
transformation
twist