SATA 05155, Руководство пользователя

Страница: 19 / 108

中文
EN DE RU KO PT JA ES 51311/05155
19
3
）
installation grinding:
Do not use grinding wheels with safety line speed less than 80m/s. Do not use damaged, unbalanced grinding wheels.
a
）
When the output shaft is completely stationary, press the shaft lock button to fix the output shaft.
b
）
Fix the lower flange to the output shaft, install the grinding wheel against the lower flange, and screw the threaded
upper flange onto the output shaft
（
note that the upper flange The installation direction is as shown in the figure below:
when the grinding plate and the cutting slice are installed, different surface contact pieces are used
）
.
c
）
Check whether the inner hole size of the grinding plate is completely in line with the flange flange, and tighten the upper
flange with a wrench.
4
）
Remove the wrench and release the shaft lock button.
contact surface
flange