01
Product information
AP
/
WIFI
RF
ON/OFF
SASWG
-
01
-
RF
-
WIFI
01
Before use read the user manual! All of the installation should be done by a qualified
technician. Warranty and warranty statement is located on the last page of this manual.
!
Important notes before first use, installation and maintenance
Before use, carefully read the manual not only for the thermostat, but also for the Heating device (heat pump,
pumps, boilers, etc.) • Turn off the power supply before installing the thermostat! • We recommend that the
installation is done by a qualified electrician • the electrical circuit must be secured with a fuse that does not
exceed the current load of wiring • Please note all safety instructions before installing • Do not expose the product
to direct sunlight, extreme cold, humidity and sudden temperature changes. This would reduce the accuracy of
the temperature measurement • Do not place the product in places that are prone to vibrations and shocks - this
can cause damage • Do not expose the product to excessive pressure, shock, dust, high temperatures or
moisture, as these can cause damage to one of the functions product, shorter energy endurance, damage to
batteries, and deformation of plastic parts. • Do not expose the product to rain or moisture, dripping or spraying
water. • Do not place any sources of fire on the product, for example, spark plugs etc. • Do not place the product
in places where there is insufficient air circulation. • Do not insert any objects into the ventilation openings. • Do
not interfere with the internal electrical wiring of the product. It may be damaged and therefore terminate the
warranty. The product must only be repaired by a trained specialist. • Use a moderately moistened cloth for
cleaning. Do not use solutions or cleaning products - may damage plastic parts and electrical wiring • Do not
immerse the product in water or other liquids. • Do not repair it yourself if the product is damaged or defective. Put
it in the repair shop where you bought it • The product should not be used by a person (including children) by
physical, sensory or mental disability or lack of experience and knowledge impeded by the safe use of the device
if they are not controlled, or if they were not informed by the person responsible for their safety about the use of
the device • Children's control is necessary to ensure that they do not play with the device.
Declaration of conformity has been issued for the product. The device can be freely used in the EU. This and
other documentation (RoHS, CE, …) is freely available on the website www.sen-controls.eu and or subsites e.g.
en.sen-controls.eu under tab “Pravno”, “Dokumenti “Legal, Documents” or similar at each published product..
Manufacturer of this product is SASWELL CONTROLS (HONGKONG) LTD. Importer, distributor and service for
Saswell is Sen Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia
Environmental protection
Do not place electronic devices and batteries after the end of their life in mixed
municipal waste - use collection points of separate waste. By properly removing the product, you will prevent
negative effects on human health and the environment. Recycling of materials contributes to the protection of
natural resources. More information on the recycling of this product is offered to you by administrative units,
household waste treatment organizations or the point of sale where you purchased the product.
