49
Android
If you own a smart device with Android operating system and have the thermostat ready in AP mode, follow
these steps:
1.
After you pressed on
+
button on top right of the overview screen, you can now click on »FIND DEVICE«.
Now a list of all nearby Saswell thermostats, that are ready to pair, should be listed on the screen.
2.
Select and press on the desired thermostat that you wish to pair. If you have more than one available, you
can distinguish them by their SSID name as every Saswell app thermostat has written its unique SSID
name on its housing and in app.
3.
After selecting the thermostat, you have to select the gateway to connect your thermostat to. The gateway
is the name of SSID of your home wireless network. Select the one that is the closest to your Saswell
thermostat to ensure connection quality. If your home wireless router is too far away, use a Wi-Fi extender
or move the thermostat or router closer. It’s recommended to have at least two strength lines on you smart
device (this is also a way to check your wireless signal strength on the thermostats location).
4.
When you’ve selected the desired wireless network, check the wifi information – wireless network name
and password. Add the password, if it’s not automatically added. When you’ve completed this step, press
“CONFIG” button to connect to the network.
5.
The app should now show a popup “Connect device to network…” and tries to connect the thermostat to
your wireless network. If the process is successfully complete, the app shows “Device connect internet
success” and now you can press button “TRY NOW”. Press it.
6.
If everything went ok, you should see your newly added thermostat under Overview of all of your added
thermostats (if there are more), named like it’s SSID (see casing of the thermostat – “SSID:Thermostat-…”.
7.
You’ve successfully added your new Saswell thermostat to the Saswell app.
