34
Permanent (constant) temperature change
Function of permanent temperature change means, that when the function is enabled, the thermostat ignores all of the
currently set schedules of Heating programs until manually canceled and uses your manually set temperature.
You can turn on the function when the device is turned on and is not in any of the menus then you shortly press the
middle menu button (button description 3). Only a symbol for hand is displayed below (display description 13) and the
Heating schedule programs are turned off. Set the temperature by pressing
or
buttons. When you’re satisfied
with your set temperature, stop pressing the buttons and device will save the settings by itself. Your new currently set
temperature will be kept until you cancel it by shortly pressing the middle button (button description 3).
This function is also usefull if you’re away for holiday or a longer time and want to keep the lowest room temperature
you want.
Setting the day and time
With a short press on the
button, the thermostat will show you the current set time and day. If you press the
button again (or just double press it at the start), you will enter the day and time edit mode. First, the minutes position is
blinking. Change the value to the current minutes by using buttons
or
. After you’re done with setting the minutes,
short press the
button to enter editing current hour. Now the hour position should blink. Again, change the hour
value. When you’ve set the hour, short pres the
button again and now you’re editing the current day. Again, change
the value and after you’re done setting current time and day. You can exit editing by pressing the
button or just wait
for the device to save the values itself after a few seconds.
