51
Connecting the thermostat with the receiver, connectivity test
The units of the transmitter (thermostat or room unit) and the receiver are connected (paired) by default.
If not, follow the procedure below:
1.
Read the receiver's instructions for connecting or connecting. mating.
(Quick summary: Press the button to
turn off the receiver so that the red LED is no longer lit. Then hold down the button for 3 seconds to turn on the yellow
LED. Release the key)
2. Turn off the thermostat so that
off
is displayed on the screen.
Now hold
button R for around 3 seconds. “
- -
“ should
show up on the screen. Thermostat is ready to be paired.
3. The devices should be now paired. "1" should appear on the screen.
The process is complete. Switch on both devices! Now test the communication by raising and lowering the heating
temperature on the thermostat
-
the receiver should confirm the communication by briefly flashing the yellow indicator
and turning on or off. turning off the heating.
If the process was unsuccessful, repeat the process from the beginning or get help on our website, youtube channel or
contact us at help@sen
-
controls.eu.
Содержание SAS908XWHB-7-RF
Страница 52: ...52 ...