46
Example of setting the default 7 day schedule with 6 switches.
Use tables at the start of this manual for
reference.
1.
Enter the editing mode by briefly pressing the
P
button.
2.
The day flashes, then press
or
to select the day you want to edit. Confirm the selection by briefly
pressing the
P
button.
3.
The time is blinking now. Press
or
key to select the desired time to start the time program. Confirm
the selection by briefly pressing the
P
button.
4.
The temperature is now flashing. Press
or
button to select the desired temperature of the time
program. Confirm the selection by briefly pressing the
P
button.
5.
Now you have finished editing the first of the six
-
time
programs for the selected day, the clock is flashing,
and the next time program (switch) editing is started. By briefly pressing the
R
key, you can finish editing
the program / schedule or continue by briefly pressing
P
to edit another time program, following the same
steps from 2
-
4.
When you are finished with the sixth time program, you will switch to editing the next day after the same
steps 2-
4.
Once you have finished editing the heating programs, just confirm with briefly pressing the
R
key. If you do
not make
any
changes within 30 seconds all the settings are saved.
